LOC FLOOR®

About This Product

A floor that complements the interiors design of tomorrow; ready to install in your home with minimal time and effort. A floor you can take with you when you move and re-install at your new address. And you won’t need any glue! Just click the panels together and you are done.

– Effortless installation, thanks to the Uniclic® click system

– Suitable for underfloor heating

– Improved moisture resistance

– Adhesive free installation

– Possible to re-install

– Recyclable

– Start where you like in any direction

Hospitality
Hospitality
Leisure
Leisure
Residential
Residential

LOC Floor® laminate floors have a 25 year (15 year manufacturer and additional 10 year FloorworX) domestic warranty provided that it is installed using FloorworX approved accessories and maintained in accordance with the manufacturer’s recommendations.

PLEASE NOTE: This product is for indoor use only.

LOC Floor® laminate floors should be installed in accordance with the manufacturer’s recommendations. LOC Floor® laminate floors must be allowed to acclimatise for 48 hours in the unopened packaging at the normal room temperature in the middle of the room where the floor is to be installed. The floors should preferably be installed parallel to the way the light falls. The ideal environment is a temperature of 15 – 20°C and relative humidity of 50 – 60%.  The base floor must be thoroughly clean and flat before LOC Floor. laminate flooring is installed. Flatten any unevenness of more than 2mm.

If installing on concrete, the moisture content may not exceed 2.5%. A freshly poured coating must dry out for at least 1 week per cm thickness up to 4cm and 2 weeks per cm thickness above 4cm, with sufficient ventilation. Concrete must therefore dry out for a minimum of 8 weeks. In the case of damp-open flooring such as carpet or needle felt flooring, first remove the existing floor covering before laying LOC Floor® laminate floors.

If installing on a wooden floor, first remove any existing floor covering. Ensure that the floor is sufficiently stable and any loose parts nailed down and if necessary a levelling underfloor must be installed. Moisture content may not exceed 10%. It is essential that the creeping space under the wooden floor be sufficiently ventilated (minimum 4cm² total ventilation opening per m²). Install new panels across planks.

LOC Floor Data Sheet

Product Selection

Lock-Flooring

Please note: Digital and print representations may vary from the actual product. Please order a sample to see the full effect.

View Products

An Accéntuate Group Company
  • PRODUCT ENQUIRY FORM

    Fields marked as (*) are required.



    ResidentialCommercial


    End-userSpecifying ProfessionalInstaller


    1-100m2100-500m2500-1000m2