QUICK-STEP® IMPRESSIVE

About This Product

Quick-Step® Impressive is a collection of laminate floors that look and feel exceptionally natural. The planks’ authentic wood grains are perfectly reflected in the floor’s joints and bevels. Due to the addition of Hydro-seal to all the joins, this is the most waterproof laminated floor ever manufactured. The completely sealed surface, even in the bevels and V-Grooves, makes this laminate even more water resistant.

– Effortless installation, thanks to the Uniclic® click system

– Up to 10x more scratch resistant

– Perfect matching accessories

– UV and heat resistant

– Suitable for underfloor heating

– Can be installed over longer and wider areas without an expansion profile (15m x 15m)

– Most waterproof laminate ever produced due to Hydro-Seal coating on the bevels

Commercial
Commercial
Corporate
Corporate
Hospitality
Hospitality
Leisure
Leisure
Residential
Residential

Quick-Step® Impressive has a 25 year domestic warranty and 5 to 15 year commercial warranty dependent on the application on wear and a lifetime warranty on the Uniclic® click system for domestic use, provided that it is installed using Quick-Step® accessories and maintained in accordance with the manufacturer’s recommendation. There is a 10 year wet area warranty for domestic use.

PLEASE NOTE: This product is for indoor use only.

Quick-Step® Impressive should be installed in accordance with the manufacturer’s recommendations. Quick-Step® Impressive must be allowed to acclimatise for 48 hours in the unopened packaging at the normal room temperature in the middle of the room where the floor is to be installed. The floors should preferably be installed parallel to the way the light falls. The ideal environment is a temperature of 15 – 20°C and relative humidity of 50 – 60%. The base floor must be thoroughly clean and flat before Quick-Step® Impressive is installed. Flatten any unevenness of more than 2mm. If installing on concrete, the moisture content may not exceed 2.5%.

A freshly poured coating must dry out for at least 1 week per cm thickness up to 4cm and 2 weeks per cm thickness above 4cm, with sufficient ventilation. Concrete must therefore dry out for a minimum of 8 weeks. First remove the existing damp-open floor covering such as carpets and needle felt flooring before laying Quick-Step® Impressive.

If installing on a wooden floor, first remove any existing floor covering. Ensure that the floor is sufficiently stable and any loose parts nailed down and if necessary a levelling underfloor must be installed. Moisture content may not exceed 10%. It is essential that the creeping space under the wooden floor be sufficiently ventilated (minimum 4cm² total ventilation opening per m²). Install new panels across planks.

Quick-Step Impressive Product Data Sheet

Product Selection

Quick-Step-ImpressiveNew

Please note: Digital and print representations may vary from the actual product. Please order a sample to see the full effect.

An Accéntuate Group Company
  • PRODUCT ENQUIRY FORM

    Fields marked as (*) are required.



    ResidentialCommercial


    End-userSpecifying ProfessionalInstaller


    1-100m2100-500m2500-1000m2