fbpx

Colorflor Plus PUR

About This Product

Colorflor Plus PUR collection consists of 18 subtle patterns in a refreshing, popular range. Colorflor Plus PUR is equipped with a PUR surface treatment for protection and easier initial maintenance. This coating also provides a better base for future maintenance procedures. Product is available in both 2mm and 2.5mm thickness (2mm is available in tiles and sheeting and 2.5mm in sheeting only).

– Durable

– PUR coating for adding protection

– Group M abrasion resistance

– Easy to maintain

– Enhanced life cycle cost 

– VOC < 10 μg/m3

– 100% recyclable

Education
Education
Commercial
Commercial
Healthcare
Healthcare
Hospitality
Hospitality
Leisure
Leisure
Corporate
Corporate

Colorflor Plus PUR must be installed in accordance with manufacturer’s recommendations. Sub-floors must be smooth, hard, clean, and dry before laying commences. Uneven, solid or suspended timber floors may need preparation to meet the required standard. In case of direct to earth concrete, a damp proof membrane must be incorporated into the sub-floor. Colorflor Plus PUR sheeting and tiles must be allowed to relax for 24 hours in a uniform room temperature between 18°C and 27°C prior to installation. The recommended adhesive for Colorflor Plus PUR sheeting is FloorworX No. 62 Plus acrylic adhesive. Colorflor Plus PUR sheeting must be hot seam welded using FloorworX welding rod. All sub-floors must be tested for moisture content prior to installation.

Supply and fix 2.0mm thick x 2.0m wide Colorflor Plus PUR homogeneous vinyl sheeting with PUR reinforced surface treatment, manufactured in accordance with EN 649 and laid in FloorworX No. 62 acrylic adhesive which has been spread using a trowel fitted with an A2 notched blade at a rate of between 5.5m2 and 6.5m2 per litre on a previously prepared Class 1 sub-floor in accordance with SANS 10070, using FloorworX Self Leveller when required, including all cutting and waste. The sheeting must be rolled in both directions with an articulated 68kg three-sectional roller immediately after it has been laid into the adhesive. Joins must be butted, grooved and heat welded using the manufacturer’s colour-matched multicolour welding rod, ensuring that the welding rod bonds to more than 70% of the sheet thickness.

Suggested Specification – Colorflor Plus PUR

FloorworX offers a 10 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations.

 

Please Note: This product is for indoor use ONLY.

Colorflor Plus PUR 2.0mm Product Data

Colorflor Plus PUR Cleaning and Maintenance

PUR Coated Vinyl Flooring Poster

SwatchProductCodeNCS CodeLRV
WickerwhiteColorflor Plus PURCLF531NCS S1500-N65,17%
SilverliningColorflor Plus PURCLF532NCS S2000-N57,13%
SterlingColorflor Plus PURCLF535NCS S3500-N32,02%
MoonriverColorflor Plus PURCLF533NCS S3502-B37,12%
SkyeColorflor Plus PURCLF536NCS S3030-R90B27,91%
DenimColorflor Plus PURCLF537NCS S4030-R90B20,37%
SapphireColorflor Plus PURCLF538NCS S5030-R80B12,28%
CoalColorflor Plus PURCLF534NCS S7502-B10,07%
OzoneColorflor Plus PURCLF552NCS S1515-R90B54,48%
MintColorflor Plus PURCLF539NCS S2020-B40G46,29%
SeagreenColorflor Plus PURCLF540NCS S4020-B90G25,92%
FernColorflor Plus PURCLF550NCS S3020-G40Y36,66%
QuicksandColorflor Plus PURCLF548NCS S3030-Y60R30,48%
BurlywoodColorflor Plus PURCLF545NCS S3010-Y30R41,32%
CornsilkColorflor Plus PURCLF543NCS S2010-Y20R52,20%
BisqueColorflor Plus PURCLF542NCS S1005-Y40R71,32%
BonfireColorflor Plus PURCLF549NCS S3050-Y80R18,15%
SundanceColorflor Plus PURCLF551NCS S2040-Y20R45,00%

STANDARD STORAGE PRACTICE

If an installation is large and material has to be stored on site, the following precautions should be taken:


Storage area must be secure and away from other trades

– Storage area should be clean, dry and environmentally stable (18 ºC – 23ºC)

– Tiles should be stacked at a maximum of 5 boxes per stack on a smooth floor

– Sheeting rolls should stand upright

– No heavy material should be placed on top of rolls or stacked boxes

Please Note: Temperature variations, excess weight or an uneven floor surface will distort the floor material. For more information please contact the FloorworX Technical Department by sending your query to info@floorworx.co.za

Please note: Products marked with ★ are Made to Order at minimum order quantities of 1000m2 and are available in sheeting only.

Product Selections

Please note: Digital and print representations may vary from the actual product. Please order a sample to see the full effect.

An Accéntuate Group Company
  • PRODUCT ENQUIRY FORM

    Fields marked as (*) are required.



    ResidentialCommercial


    End-userSpecifying ProfessionalInstaller


    1-100m2100-500m2500-1000m2