Colorflor Standard

About This Product

Colorflor Standard is a 2m wide fully-flexible vinyl sheeting available in a collection of 18 linear designs. Colorflor Standard is equipped with a factory finish for initial protection. It also provides a base for future maintenance procedures.

  • – Unique surface restoration
  • – Factory-applied surface finish
  • – VOC < 10 μg/m3
  • – 100% recyclable
  • – 81% natural


Colorflor Standard must be installed in accordance with manufacturer’s recommendations. Sub-floors must be smooth, hard, clean, and dry before laying commences. Uneven, solid or suspended timber floors may need preparation to meet the required standard. In case of direct to earth concrete, a damp proof membrane must be incorporated into the sub-floor. Colorflor Standard sheeting must be allowed to relax for 24 hours in a uniform room temperature between 18°C and 27°C prior to installation. The recommended adhesive for Colorflor Standard sheeting and tiles is FloorworX No. 62 acrylic adhesive. Colorflor Standard sheeting must be hot seam welded using FloorworX welding rod. All sub-floors must be tested for moisture content prior to installation.

Supply and fix 2.0mm thick x 2.0m wide Colorflor Standard homogeneous vinyl sheeting, manufactured in accordance with EN 649 and laid in FloorworX No. 62 acrylic adhesive which has been spread using a trowel fitted with an A2 notched blade at a rate of between 5.5m2 and 6.5m2 per litre on a previously prepared Class 1 sub-floor in accordance with SANS 10070, using FloorworX Self Leveller when required, including all cutting and waste. The sheeting must be rolled in both directions with an articulated 68kg three-sectional roller immediately after it has been laid into the adhesive. Joins must be butted, grooved and heat welded using FloorworX Welding Rod, ensuring that the welding rod bonds to more than 70% of the sheet thickness. The newly laid floor must, after 72 hours, be stripped using FloorworX Stripper, scrubbed using a diluted solution of FloorworX Rinse and then sealed with 3 coats of FloorworX Silk Matt or Gloss Sealer.

Suggested Specifications – Colorflor Standard

FloorworX offers a 10 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations.


Please Note: This product is for indoor use ONLY.

Colorflor Standard Product Data

Colorflor Standard Cleaning and Maintenance

PUR Coated Vinyl Flooring Poster


SwatchProductCodeNCS Code 1LRV
Crushed IceColorflor StandardCFS580NCS S2005-R90B55,38%
Iced CoffeeColorflor StandardCFS581NCS S2005-Y50R53,70%
MacchiatoColorflor StandardCFS582NCS S3005-Y50R40,42%
FrothColorflor StandardCFS583NCS S1500-N65,17%
BubblegumColorflor StandardCFS584NCS S3030-R90B29,91%
CinnabonColorflor StandardCFS585NCS S3010-Y20R40,78%
FreezoColorflor StandardCFS586NCS S2000-N57,13%
MochaccinoColorflor StandardCFS587NCS S3010-Y40R39,57%
Hot ChocolateColorflor StandardCFS588NCS S5010-Y50R22,78%
ChoccacinoColorflor StandardCFS589NCS S5005-Y50R24,31%
Earl GreyColorflor StandardCFS590NCS S4502-B28,60%
EspressoColorflor StandardCFS591NCS S6502-B15,11%
Lady GreyColorflor StandardCFS592NCS S3000-N45,26%
Vivalto BlueColorflor StandardCFS593NCS S4040-R90B15,20%
MilkybarColorflor StandardCFS594NCS S1505-Y30R64,02%
Chai TeaColorflor StandardCFS595NCS S3010-Y40R52,20%
Ginger SnapColorflor StandardCFS596NCS S3020-Y10R39,73%
HoneycombColorflor StandardCFS597NCS S2040-Y30R42,00%

Colorflor Standard Presentation


If an installation is large and material has to be stored on site, the following precautions should be taken:

Storage area must be secure and away from other trades

– Storage area should be clean, dry and environmentally stable (18 ºC – 23ºC)

– Tiles should be stacked at a maximum of 5 boxes per stack on a smooth floor

– Sheeting rolls should stand upright

– No heavy material should be placed on top of rolls or stacked boxes

Please Note: Temperature variations, excess weight or an uneven floor surface will distort the floor material. For more information please contact the FloorworX Technical Department by sending your query to info@floorworx.co.za

Please note: Tiles are available on special order ONLY

Product Selection

Please note: Digital and print representations may vary from the actual product. Please order a sample to see the full effect.

View Products

An Accéntuate Group Company

    Fields marked as (*) are required.


    End-userSpecifying ProfessionalInstaller