fbpx

About This Product

A complete range of colour co-ordinated vinyl accessories to ensure a perfect finish.

The Extruda range of vinyl accessories has been developed to ensure that a complete system is offered. The Extruda profiles are thus available either ex-stock or on a made-to-order basis, in 8 specially selected standard colours. These colours have been selected to enable the customer the widest possible choice in that the colours are co-ordinated with the major flooring products which FloorworX manufactures and distributes.

Education
Education
Commercial
Commercial
Healthcare
Healthcare
Hospitality
Hospitality
Leisure
Leisure
Corporate
Corporate
Industrial
Industrial





In all cases, except for Handrail, FloorworX No. 71 contact adhesive should be used. It should be spread evenly and quickly with a brush onto both material and working surface. Allow both surfaces to become touch dry – it takes approximately 15 minutes. Place material carefully into position at one end, then work gradually along its length. When completely positioned, apply firm pressure along the whole length to ensure perfect contact between the two adhesive surfaces.

Extruda Installation Instructions

Suggested Specification – Extruda

FloorworX offers a 1 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations.

Product Selection

In all cases, except for Handrail, FloorworX No. 71 contact adhesive should be used. It should be spread evenly and quickly with a brush onto both material and working surface. Allow both surfaces to become touch dry – it takes approximately 15 minutes. Place material carefully into position at one end, then work gradually along its length. When completely positioned, apply firm pressure along the whole length to ensure perfect contact between the two adhesive surfaces.

Handrail is specially designed to combine decorative appeal with functionality. The wide variety of angles, bends and wreaths that can be achieved, allow architectural scope in the design and finish of staircases and landings. Standard rails are manufactured from a tough, gloss finished flexible vinyl that is easily installed and maintained.

MHR1006:(40 x 6mm) packed in rolls of 20m
MHR2010:(40 x 40mm) packed in rolls of 20m
MHR3006:(50 x 6mm) packed on rolls of 20m
MHR4010:(50 x 10mm) packed in rolls of 20m

All dimensions are to be read as nominal values.

Extruda-Handrail

Stair Nosing is designed to provide a neat and effective non-slip tread to any step surface. It may be used by itself or in conjunction with any resilient floor finish suitable for stairs.

MSN120:

(65mm wide) packed in 3 x 3m lengths

All dimensions are to be read as nominal values.

Extruda-Stair-Nosing

Trim Edge provides a neat and safe finishing link between two floorcoverings.

MPT25:(25mm wide) packed in rolls of 30m

All dimensions are to be read as nominal values.

Extruda-Trim-Edge

Edging strip provides a neat and safe bevelled edge in doorways or wherever a difference in surface levels occur.

MES:(25mm wide) packed in rolls of 30m

All dimensions are to be read as nominal values.

Extruda-Edging-Strip

MCB70:(70mm high) packed in rolls of 30m
MCB100:(100mm high) packed in rolls of 30m
MCB150:(150mm high) vertical skirting used in areas where fillets are not required. Packed in lengths of 30m
MFE5:(100mm high hospital skirting) in 15m pack consisting of 5 lengths of 3m
MFE10:(30mm high) packed in rolls of 30m

All dimensions are to be read as nominal values.

Skirting

MFE5INT:95mm nominal height, 150mm nominal length with 50mm nominal foot Internal Corner packed individually
MFE5EXT:95mm nominal height, 150mm nominal length with 50mm nominal foot External Corner packed individually

All dimensions are to be read as nominal values.

External-Corner-Drawings Internal-Corner-Drawings

Cove Fillet for use where the vinyl floor covering is to be turned up the walls.

MCF54:(41mm high) packed in rolls of 15m
MCF35:(26mm high) packed in rolls of 30m
MCF 22:(15mm high) packed in rolls of 30m

All dimensions are to be read as nominal values.

Extruda-Cove-Fillet

MTE35: The product is an injection moulding and is only available in black. It is intended to be used in conjunction with Cove Fillet at doorways to hide the gap that is often visible there.

All dimensions are to be read as nominal values.

Extruda-Taper-End

MFE16/23 MCS18: A Capping Strip to give a neat finish at the end of vinyl wall cladding or where flexible wall sheeting has been turned up the wall or over MCF54/35/22 fillet to form a skirting or cladding. Packed in 30m rolls.

All dimensions are to be read as nominal values.

Extruda-Capping-Strip

All dimensions are to be read as nominal values.

Please note: Digital and print representations may vary from the actual product. Please order a sample to see the full effect.

View Products

An Accéntuate Group Company
  • PRODUCT ENQUIRY FORM

    Fields marked as (*) are required.



    ResidentialCommercial


    End-userSpecifying ProfessionalInstaller


    1-100m2100-500m2500-1000m2