fbpx

Floorflex®

About This Product

Semi-flexible vinyl floor tiles available in 3 gauges and a range of 18 standard colours to meet the most demanding requirements in terms of tone and shade. Floorflex® complements any interior design scheme with its tremendous long-lasting characteristics and aesthetics.

  • – Durable
  • – SANS 581 mark bearing
  • – 100% recyclable
  • – 70% natural
  • – Low carbon footprint
  • – Locally manufactured
Education
Education
Commercial
Commercial
Healthcare
Healthcare
Hospitality
Hospitality
Leisure
Leisure
Corporate
Corporate

Floorflex® should be installed in accordance with manufacturer’s recommendations. Sub-floors must be smooth, hard, clean, and dry before laying commences. Uneven, solid or suspended timber floors may need preparation to meet the required standard. In case of direct to earth concrete, a damp proof membrane must be incorporated into the sub-floor. Floorflex® tiles must be allowed to relax for 24 hours in a uniform room temperature between 18°C and 27°C prior to installation. All sub-floors must be tested for moisture content prior to installation. The recommended adhesive for Floorflex® tiles is FloorworX No. 62 acrylic adhesive. It is essential that during the course of installation the material be rolled in both directions with an articulated 68kg three section metal floor roller.

Supply and fix 1.6mm/2.0mm/2.5mm thick x 300mm x 300mm Floorflex® semi-flexible vinyl tiles manufactured in accordance with SANS 581 and laid in FloorworX No. 62 acrylic adhesive which has been spread using a trowel fitted with an A2 notched blade at a rate of between 5.5m2 and 6.5m2 per litre on a previously prepared Class 1 sub floor in accordance with SANS 10070, using FloorworX Self Leveller when required, including all cutting and waste. The flooring must be rolled in both directions with an articulated 68kg three-sectional roller immediately after it has been laid into the adhesive. The newly laid floor must, after 72 hours, be stripped using FloorworX Stripper, scrubbed using a diluted solution of FloorworX Rinse and then sealed with 3 coats of FloorworX Silk Matt or Gloss Sealer.

Suggested Specifications – Floorflex®

FloorworX offers a 15 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations.

 

Please Note: This product is for indoor use ONLY.

Floorflex® Product Data

Floorflex® Cleaning and Maintenance

Uncoated Vinyl Flooring Poster

Swatch NameProduct NameProduct CodeNCS Code
KilimanjaroFloorflex®MF2526NCS S0500-N
Moor GreyFloorflex®MF2502NCS S4000-N
LeadFloorflex®MF2517NCS S5502-R
BambooFloorflex®MF2529NCS S1005-G90Y
Pale WoodFloorflex®MF2534NCS S3010-Y10R
Dusty SandFloorflex®MF2561NCS 3020-Y20R
CoralFloorflex®MF2521NCS S2005-Y50R
Hi-VeldtFloorflex®MF2520NCS S3010-Y50R
AmazoniteFloorflex®MF2575NCS S2020-B50G
Lapis LazuliFloorflex®MF2525NCS S4020-R90B
Sea MistFloorflex®MF2544NCS S3010-G10Y
MalachiteFloorflex®MF2528NCS S4020-B90G
TambotiFloorflex®MF2515NCS S3030-Y30R
CopperFloorflex®MF2522NCS S4040-Y50R
BaobabFloorflex®MF2557NCS S5020-Y40R
Martian SkyFloorflex®MF2524NCS S3060-R
Old SteelFloorflex®MF2516NCS S7502-B
Iron FilingsFloorflex®MF2513NCS S8500-N
Plain BlackFloorflex®MF2513NCS S8500-N
Plain WhiteFloorflex®MF1900NCS S0500-N

Floorflex® Presentation

STANDARD STORAGE PRACTICE

If an installation is large and material has to be stored on site, the following precautions should be taken:


Storage area must be secure and away from other trades

– Storage area should be clean, dry and environmentally stable (18 ºC – 23ºC)

– Tiles should be stacked at a maximum of 5 boxes per stack on a smooth floor

– Sheeting rolls should stand upright

– No heavy material should be placed on top of rolls or stacked boxes

Please Note: Temperature variations, excess weight or an uneven floor surface will distort the floor material. For more information please contact the FloorworX Technical Department by sending your query to info@floorworx.co.za

Product Selection

Please note:  Refers to Ex. Stock colours

Please note: ★ ★These colours are available in 2.5mm thickness and available upon request. Please direct enquiries to 0860 346 679..

Please note: Digital and print representations may vary from the actual product. Please order a sample to see the full effect.

View Products

An Accéntuate Group Company
  • PRODUCT ENQUIRY FORM

    Fields marked as (*) are required.



    ResidentialCommercial


    End-userSpecifying ProfessionalInstaller


    1-100m2100-500m2500-1000m2