fbpx

Industrial Floor

About This Product

FloorworX Industrial Floor vinyl sheeting available in a choice of 2 surface finishes that includes a range of 6 embossed colours, available in 2.00mm and 3.50mm gauges; and a range of 4 studded Minidome colours, available in 3.50mm thickness only. FloorworX Industrial Floor is designed for industrial applications where aesthetic appearance is of less significance than performance.

  • – Durable
  • – Matching welding rod available in
  • – 15m2 rolls
  • – SANS 581 mark bearing
  • – 100% recyclable
  • – 56% natural
  • – Low carbon footprint
  • – Locally manufactured
Industrial
Industrial

FloorworX Industrial Floor should be installed in accordance with manufacturer’s recommendations. Sub-floors must be smooth, hard, clean, and dry before laying commences. Uneven, solid or suspended timber floors may need preparation to meet the required standard. In case of direct to earth concrete, a damp proof membrane must be incorporated into the sub-floor. FloorworX Industrial Floor sheeting must be allowed to relax for 24 hours in a uniform room temperature between 18°C and 27°C prior to installation. All sub-floors must be tested for moisture content prior to installation. The recommended adhesive for FloorworX Industrial Floor 2mm surface embossed sheeting is FloorworX No. 62 acrylic adhesive. The recommended adhesive FloorworX Industrial Floor 3.5mm surface embossed/ Minidome is FloorworX No. 71 contact adhesive. Joins to be butted, grooved and heat welded ensuring that the welding rod bonds to more than 70% of the sheet thickness. It is essential that during the course of installation the material be rolled in both directions with an articulated 68kg three section metal floor roller.

INDUSTRIAL SHEETING MIF 2.0MM

Supply and fix 2.0mm thick x 1.0m wide FloorworX Industrial Floor surface-embossed vinyl sheeting, manufactured to specification and laid in FloorworX No. 62 acrylic adhesive which has been spread using a trowel fitted with an A2 notched blade at a rate of between 5.5m2 and 6.5m2 per litre on a previously prepared Class 1 sub-floor in accordance with SANS 10070, using FloorworX Self Leveller when required, including all cutting and waste. The sheeting must be rolled in both directions with an articulated 68kg three-sectional roller immediately after it has been laid into the adhesive. Joins must be butted, grooved and heat welded using FloorworX Welding Rod, ensuring that the welding rod bonds to more than 70% of the sheet thickness. The newly laid floor must, after 72 hours, be stripped using FloorworX Stripper, scrubbed using a diluted solution of FloorworX Rinse and then sealed with 3 coats of FloorworX Silk Matt or Gloss Sealer.

SURFACE EMBOSSED 3.5MM / MINIDOME 3.5MM

Supply and fix 3.5mm thick x 1.0m wide FloorworX Industrial Floor surface embossed/Minidome vinyl sheeting, manufactured to specification and adhered with FloorworX No.71 contact adhesive applied to both the sheeting and the previously prepared Class 1 sub-floor in accordance with SANS 10070 (making use of FloorworX Self Leveller when required) using a brush or paint roller at the rate of approximately 3.5m2 per litre per single application, including all cutting and waste. The sheeting must be rolled in both directions with an articulated 68kg three-sectional roller immediately after it has been laid into the adhesive. Joins must be butted, grooved and heat welded using FloorworX Welding Rod, ensuring that the welding rod bonds to more than 70% of the sheet thickness. The newly laid floor must, after 72 hours, be stripped using FloorworX Stripper, scrubbed using a diluted solution of FloorworX Rinse and then sealed with 3 coats of FloorworX Silk Matt or Gloss Sealer.

Suggested Specifications – Industrial Floor

FloorworX offers a 15 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations.

 

Please Note: This product is for indoor use ONLY.

Industrial Floor Product Data

Industrial Floor Cleaning and Maintenance

Uncoated Vinyl Flooring Poster

Swatch NameProduct NameProduct CodeNCS Code
Grey EmbossedIndustrial FloorMIF40NCS S5000-N
Black EmbossedIndustrial FloorMIF10NCS S7502-B
Green EmbossedIndustrial FloorMIF30NCS S5020-B90G
Blue EmbossedIndustrial FloorMIF60NCS S5030-R90B
Terracotta EmbossedIndustrial FloorMIF20NCS S6020-Y80R
Brown EmbossedIndustrial FloorMIF80NCS S5020-Y40R
Grey MinidomeIndustrial FloorMIF41NCS S5000-N
Black MinidomeIndustrial FloorMIF11NCS S7502-B
Blue MinidomeIndustrial FloorMIF61NCS S5030-R90B
Green MinidomeIndustrial FloorMIF31NCS S5020-B90G

Industrial Floor Presentation

STANDARD STORAGE PRACTICE

If an installation is large and material has to be stored on site, the following precautions should be taken:


Storage area must be secure and away from other trades

– Storage area should be clean, dry and environmentally stable (18 ºC – 23ºC)

– Tiles should be stacked at a maximum of 5 boxes per stack on a smooth floor

– Sheeting rolls should stand upright

– No heavy material should be placed on top of rolls or stacked boxes

Please Note: Temperature variations, excess weight or an uneven floor surface will distort the floor material. For more information please contact the FloorworX Technical Department by sending your query to info@floorworx.co.za

Please note: Refers to Ex. Stock colours.

Please note: ★★Refers to Ex. Stock Colours available in 2.00mm thickness only and also available upon request in 3.50mm thickness with minimum order quantities of 1000m2.

Product Selection

Please note: Digital and print representations may vary from the actual product. Please order a sample to see the full effect.

View Products

An Accéntuate Group Company
  • PRODUCT ENQUIRY FORM

    Fields marked as (*) are required.



    ResidentialCommercial


    End-userSpecifying ProfessionalInstaller


    1-100m2100-500m2500-1000m2