iQ Toro SC

About This Product

IQ Toro SC is a permanently static conductive flooring developed for use in operating theatres, x-ray rooms, clean rooms and laboratories. The advanced conductive properties are achieved by carbon-black particles running through the vinyl along with a pure carbon backing. Part of the iQ range, this collection also offers extreme durability, as well as superior wear, stain and abrasion resistance for heavy-traffic areas. Colours co-ordinated with the other products and accessories of the iQ ranges.

– Permanently  static conductive

– Best life-cycle cost on the market

– Unique dry-buffing  surface restoration

– Part of a multi-solution offer


iQ Toro SC must be installed in accordance with manufacturer’s recommendations. Sub-floors must be smooth, hard, clean, and dry before laying commences. Uneven, solid or suspended timber floors may need preparation to meet the required standard. In case of direct to earth concrete, a damp proof membrane must be incorporated into the sub-floor. iQ Toro SC sheeting must be allowed to relax for 24 hours in a uniform room temperature between 18°C and 27°C prior to installation. Recommended adhesive is FloorworX No. 27 acrylic conductive adhesive. iQ Toro SC sheeting must be hot seam welded using FloorworX welding rod.

NOTE:  All sub-floors must be tested for moisture content prior to installation.

Supply and fix 2.0mm thick x 2.0m wide iQ Toro SC non- directional static conductive vinyl sheeting, manufactured in accordance with EN 649 and laid over an earthed grid of aluminium tape in FloorworX No. 27 acrylic conductive adhesive which has been spread using a TKBA2 trowel on a previously prepared Class 1 sub-floor in accordance with SANS 10070, using FloorworX Self Leveller when required, including all cutting and waste. iQ Toro SC sheeting must be rolled in both directions with an articulated 68kg three- sectional roller immediately after it has been laid into the adhesive. Joins must be butted, grooved and heat welded using the manufacturer’s welding rod, ensuring that the welding rod bonds to more than 70% of the sheet thickness. After completing the installation the floor must be electrically tested for resistivity in accordance with the requirements of SANS 6160.

FloorworX offers a 5 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations.

PLEASE NOTE: This product is for indoor use ONLY.

IQ Toro SC Product Data Sheets

IQ Toro SC Cleaning and Maintenance

Static Control Vinyl Flooring Poster

Swatch NameProduct NameProduct CodeNCS Code
WhiteiQ Granit Toro SC3093570S 1502-Y50R
BeigeiQ Granit Toro SC3093104S 1005-Y40R
Light BrowniQ Granit Toro SC3093574S 4005-Y50R
BrowniQ Granit Toro SC3093575S 7005-Y80R
Light BlueiQ Granit Toro SC3093107S 2020-R90B
Yellow BeigeiQ Granit Toro SC3093105S 2020-Y30R
Light YellowiQ Granit Toro SC3093572S 1515-Y30R
Brown YellowiQ Granit Toro SC3093573S 2030-Y30R
GreeniQ Granit Toro SC3093576S 4020-G50Y
Light GreyiQ Granit Toro SC3093100S 1002-Y50R
GreyiQ Granit Toro SC3093101S 2502-B
Dark GreyiQ Granit Toro SC3093102S 4502-B
Dark GreyiQ Granit Toro SC3093578S 6502-B
BlackiQ Granit Toro SC3093103S 8502-B


If an installation is large and material has to be stored on site, the following precautions should be taken:

 – Storage area must be secure and away from other trades

– Storage area should be clean, dry and environmentally stable  18 C   2  C

– Sheeting rolls should stand upright

– No heavy material should be placed on top of rolls

 Please Note: Temperature variations, excess weight or an uneven floor surface will distort the floor material. For more information please contact the FloorworX Technical Department by sending your query to technical@floorworx.co.za

Product Selection

Please note: Digital and print representations may vary from the actual product. Please order a sample to see the full effect.

View Products

An Accéntuate Group Company

    Fields marked as (*) are required.


    End-userSpecifying ProfessionalInstaller