fbpx

Novilon Authentic

About This Product

The Novilon Authentic Collection is a stylish and functional vinyl floor covering. This slip-resistant flooring will meet all your residential requirements and allow you to achieve the desired atmosphere in any room in your home, be it country-side living, an elegant or contemporary interior.

Swatch NamePattern RepeatLaying Direction
Beech1000mm X 1000mmDo not reverse
Black & White1000mm X 1000mmDo not reverse
Cork1000mm X 1000mmReverse
Dark Oak1000mm X 1000mmDo not reverse
Light Oak1000mm X 1000mmDo not reverse
Light Stone1000mm X 1000mmReverse
  • – Class T Abrasion Resistance
  • – Impact Sound Reduction of 14dB
  • – Easy to maintain
  • – Low VOC Emissions
  • – Good chemical resistance
Residential
Residential

I am test text for Image with text shortcode.

Novilon Authentic should be installed in accordance with manufacturer’s recommendations. Sub-floors must be smooth, hard, clean, and dry before laying commences. Uneven, solid or suspended timber floors may need preparation to meet the required standard. In case of direct to earth concrete, it is essential that a damp proof membrane is incorporated. Novilon Authentic must be allowed to relax for 24 hours in a uniform room temperature between 18°C and 27°C. All sub-floors must be tested for moisture content prior to installation. Note that moisture in the sub-floor will react adversely with the adhesive during the curing period. Recommended adhesive: FloorworX No. 62 acrylic adhesive. Weld all joints with Noviweld solvent weld. Correctly applied Noviweld solvent weld seals al the joins preventing the penetration of moisture and dirt. It is important to seal around wet areas, sealing around edges of a new floor, especially where there is an abundance of water e.g. around baths, basins, toilets and laundries.

Supply and fix 1.50mm thick x 2.0m wide Novilon Authentic sheeting, manufactured in accordance with EN 653 and laid in FloorworX No. 62 acrylic adhesive which has been spread using a trowel fitted with an A2 notched blade at a rate of between 5.5m2 and 6.5m2 per litre on a previously prepared Class 1 sub-floor in accordance with SANS 10070, using FloorworX Self Leveller when required, including all cutting and waste. The sheeting must be rolled in both directions with an articulated 68kg three-sectional roller immediately after it has been laid into the adhesive. Joins must be welded with Noviweld solvent weld, especially around water points such as baths, basis, toilets and laundries.

Note:
Do not overlay Novilon Authentic sheeting over old cushion vinyl. If Novilon Authentic sheeting is laid over old, embossed cushion vinyl the sheeting may indent and the old pattern will start to show through eventually. This will detract from the appearance of the newly laid floors and will result in premature deterioration of the floor surface.

Suggested Specification – Novilon

FloorworX offers a 5 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations.

 

Please Note: This product is for indoor use ONLY.

Novilon Do’s and Don’ts

Novilon Cleaning and Maintenance

Novilon Authentic Product Data

STANDARD STORAGE PRACTICE

If an installation is large and material has to be stored on site, the following precautions should be taken:


Storage area must be secure and away from other trades

– Storage area should be clean, dry and environmentally stable (18 ºC – 23ºC)

– Tiles should be stacked at a maximum of 5 boxes per stack on a smooth floor

– Sheeting rolls should stand upright

– No heavy material should be placed on top of rolls or stacked boxes

Please Note: Temperature variations, excess weight or an uneven floor surface will distort the floor material. For more information please contact the FloorworX Technical Department by sending your query to info@floorworx.co.za

Product Selection

Please note: Digital and print representations may vary from the actual product. Please order a sample to see the full effect.

View Products

An Accéntuate Group Company
  • PRODUCT ENQUIRY FORM

    Fields marked as (*) are required.



    ResidentialCommercial


    End-userSpecifying ProfessionalInstaller


    1-100m2100-500m2500-1000m2