fbpx

Start

About This Product

Start offers an economical solution for smaller sport rooms where durability and safety of the playing surface is the number one priority.

Its high-density foam backing ensures sufficient foot comfort.

  • – Cross-linked surface which increases the wear resistance and prevents dirt adhesion
  • – Free of solvents and heavy metals
  • – Low maintenance cost
Education
Education

I am test text for Image with text shortcode.

Healthcare
Healthcare

I am test text for Image with text shortcode.

Leisure
Leisure

I am test text for Image with text shortcode.

Sport
Sport

I am test text for Image with text shortcode.

Start should be installed in accordance with manufacturer’s recommendations. Sub-floors must be smooth, hard, clean, and dry before laying commences. Uneven, solid or suspended timber floors may need preparation to meet the required standard. In case of direct to earth concrete, it is essential that a damp proof membrane is incorporated. Start must be allowed to relax for 24 hours in a uniform room temperature between 18°C and 27°C. All sub-floors must be tested for moisture content prior to installation. Recommended adhesive is FloorworX No. 62 acrylic adhesive.

Supply and fix 4.0mm thick x 2.0m wide Start vinyl sheeting, manufactured in accordance with EN 651 and laid in FloorworX No. 62 acrylic adhesive which has been spread using a trowel fitted with an A2 notched blade at a rate of between 5.5m2 and 6.5m2 per litre on a previously prepared Class 1 sub-floor in accordance with SANS 10070, using FloorworX Self Leveller when required, including all cutting and waste. The sheeting must be rolled in both directions with an articulated 68kg three-sectional roller immediately after it has been laid into the adhesive. Joins must be butted, grooved and heat welded using the manufacturer’s welding rod, ensuring that the welding rod bonds to more than 70% of the sheet thickness.

Suggested Specification – Start

Start Product Data

FloorworX offers a 5 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations.

 

Please Note: This product is for indoor use ONLY.

Start Cleaning and Maintenance

PUR Coated Vinyl Flooring Poster

ProductCodeNCS Code 1NCS Code 2NCS Code 3LRV
Start4181-651S3020-Y20RS3030-Y30RS4020-Y30R10,9%
Start4000-665S2570-Y50R10,9%
Start4000-659S5030-R90B10,9%
Start4000-660S5030-G10Y10,9%

Start Presentation

STANDARD STORAGE PRACTICE

If an installation is large and material has to be stored on site, the following precautions should be taken:


Storage area must be secure and away from other trades

– Storage area should be clean, dry and environmentally stable (18 ºC – 23ºC)

– Tiles should be stacked at a maximum of 5 boxes per stack on a smooth floor

– Sheeting rolls should stand upright

– No heavy material should be placed on top of rolls or stacked boxes

Please Note: Temperature variations, excess weight or an uneven floor surface will distort the floor material. For more information please contact the FloorworX Technical Department by sending your query to info@floorworx.co.za

Product Selection

Please note: Digital and print representations may vary from the actual product. Please order a sample to see the full effect.

View Products

An Accéntuate Group Company
  • PRODUCT ENQUIRY FORM

    Fields marked as (*) are required.



    ResidentialCommercial


    End-userSpecifying ProfessionalInstaller


    1-100m2100-500m2500-1000m2