fbpx

Superflex®

About This Product

Fully-flexible vinyl floor sheeting and tiles available in 2 gauges and a range of 16 standard colours. Superflex® combines a distinctive yet forgiving marble effect with high standards of performance in terms of durability.

  • – Durable
  • – Matching welding rod available in
  • – SANS 581 mark bearing
  • – Group M abrasion resistance rating
  • – 100% recyclable
  • – 56% natural
  • – Low carbon footprint
  • – Locally manufactured
Education
Education
Commercial
Commercial
Healthcare
Healthcare
Hospitality
Hospitality
Leisure
Leisure
Corporate
Corporate

Superflex® should be installed in accordance with manufacturer’s recommendations. Sub-floors must be smooth, hard, clean, and dry before laying commences. Uneven, solid or suspended timber floors may need preparation to meet the required standard. In case of direct to earth concrete, a damp proof membrane must be incorporated into the sub-floor. Superflex® sheeting and tiles must be allowed to relax for 24 hours in a uniform room temperature between 18°C and 27°C prior to installation. All sub-floors must be tested for moisture content prior to installation. The recommended adhesive for Superflex® sheeting and tiles is FloorworX No. 62 acrylic adhesive. Superflex® sheeting must be hot seam welded using FloorworX Welding rod. It is essential that during the course of installation the material be rolled in both directions with an articulated 68kg three section metal floor roller.

Superflex® Sheeting

Supply and fix 2.0mm/2.5mm thick x 1.2m wide Superflex® fully flexible vinyl sheeting,
manufactured in accordance with SANS 786 and laid in FloorworX No. 62 acrylic adhesive which has been spread using a trowel fitted with an A2 notched blade at a rate of between 5.5m2 and 6.5m2 per litre on a previously prepared Class 1 sub-floor in accordance with SANS 10070, using FloorworX Self Leveller when required, including all cutting and waste. The sheeting must be rolled in both directions with an articulated 68kg three-sectional roller immediately after it has been laid into the adhesive. Joins must be butted, grooved and heat welded using FloorworX Welding Rod, ensuring that the welding rod bonds to more than 70% of the sheet thickness. The newly laid floor must, after 72 hours, be stripped using FloorworX Stripper, scrubbed using a diluted solution of FloorworX Rinse and then sealed with 3 coats of FloorworX Silk Matt or Gloss Sealer.

Superflex® Tiles

Supply and fix 2.0mm/2.5mm thick x 300mm x 300mm Superflex® fully flexible vinyl tiles, manufactured in accordance with SANS 786 and laid in FloorworX No. 62 acrylic adhesive which has been spread using a trowel fitted with an A2 notched blade at a rate of between 5.5m2 and 6.5m2 per litre on a previously prepared Class 1 sub-floor in accordance with SANS 10070, using FloorworX Self Leveller when required, including all cutting and waste. The flooring must be rolled in both directions with an articulated 68kg three-sectional roller immediately after it has been laid into the adhesive. The newly laid floor must, after 72 hours, be stripped using FloorworX Stripper, scrubbed using a diluted solution of FloorworX Rinse and then sealed with 3 coats of FloorworX Silk Matt or Gloss Sealer.

Suggested Specifications – Superflex®

Superflex® Product Data

FloorworX offers a 15 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations.

 

Please Note: This product is for indoor use ONLY.

Superflex® Cleaning and Maintenance

Uncoated Vinyl Flooring Poster

Swatch Name Product Name Product Code NCS Code
Cloud Wisp Superflex® MS132 NCS S1002-Y
Whisper Grey Superflex® MS123 NCS S2002-G50Y
Ash Grey Superflex® MS122 NCS S3000-N
Charcoal Superflex® MS113 NCS S5502-B
Bone Superflex® MS181 NCS S1005-Y40R
Sandalwood Superflex® MS183 NCS S2010-Y40R
Hazelnut Superflex® MS185 NCS S4010-Y40R
Blue Sky Superflex® MS172 NCS S1515-R80B
Prussian Blue Superflex® MS174 NCS S3030-R80B
Purple Rain Superflex® MS173 NCS S2030-R60B
Fennel Superflex® MS164 NCS S2010-B90G
Herb Green Superflex® MS162 NCS S4010-B90G
Citrus Superflex® MS153 NCS S0530-Y20R
Burnt Orange Superflex® M157 NCS S2075-Y60R
Fired Clay Superflex® MS187 NCS S4030-Y70R
Fiery Red Superflex® MS142 NCS S0570-Y80R

Superflex® Presentation

STANDARD STORAGE PRACTICE

If an installation is large and material has to be stored on site, the following precautions should be taken:


Storage area must be secure and away from other trades

– Storage area should be clean, dry and environmentally stable (18 ºC – 23ºC)

– Tiles should be stacked at a maximum of 5 boxes per stack on a smooth floor

– Sheeting rolls should stand upright

– No heavy material should be placed on top of rolls or stacked boxes

Please Note: Temperature variations, excess weight or an uneven floor surface will distort the floor material. For more information please contact the FloorworX Technical Department by sending your query to info@floorworx.co.za

Product Selection

Please note: Products marked with ★ are Made to Order at minimum order quantities of 1000m2 and are available in sheeting only.

Please note: Digital and print representations may vary from the actual product. Please order a sample to see the full effect.

View Products

An Accéntuate Group Company
  • PRODUCT ENQUIRY FORM

    Fields marked as (*) are required.



    ResidentialCommercial


    End-userSpecifying ProfessionalInstaller


    1-100m2100-500m2500-1000m2